A full range of punches and dies are available for various punching needs. 
Quick change retaining nut system for fast punch tooling change. 
Thoughtfully designed stripper for visibility, safety and ease of use.
A large 2-piece table with scales and gauging stops is standard on all models.
Stripper with interchangeable plates of various openings to minimize deformation is standard on all models. 
 

Hydraulic Multi-Purpose Ironworker Machine

I. Structure and performance introduction:
  

This series of Ironworker are ideal equipment for cutting all kinds of angle steel, I-beam, U-shape steel, right angle or 45 degree angle steel. Multi-work stations make it possible to finish several operations simultaneously on one machine, such as punching, shearing and notching.

Dual-piston-type combined punching and shearing machine allows two-man operation at the same time (stamping+another work station). 

German Rexroths integrated hydraulic valves block ensures the stability of the machine. 

High-quality innetal gear oil pump Sunny brand.

Through Thermal effect of annealing processing, the entire rack is able to keep its shape forever, without deformation.

The introduction of famous brands accessories ensures the parts service life and use precision.

 * Punching: effective punching can be achieved with the machine, and stamping die is easy to be replaced.

 * Bar cutting: It can quickly cut the round bar and square steel, if you want to cut U-shaped, I-beam or T-profile section steel only by exchanging the cutting blade and the operation procedure is very simple.

 * Angle cutting: Tt can cut several 90 ° and 45 ° angles with the help of special dies.

 * Metal Sheet Bending: it is very easy to fulfill the daily metal sheet bending work by making the bending moulds.

 * Notching: The machine is equipped with a large-shaped slotting blade head, which can meet your general use, as to, special shaping blade head can be customized.
  

 II. Main functions:

 * 2 independent hydraulic pistons and 2 sets of foot-pedal allows two people operating at the same time.

 * More efficient stroke-control functions of piston.

 * Central lubricating system

 * Motor-driven rear stopper (Optional)

 * Lighting devices for work

 * 5 independent work-positions: punch pin and die (standard punching dies),cutting blade group for round and square steel, shearing blades for steel plate, slotting and angle-cutting blade.

III. Functions Tree,

Assemblings,

The following 9 sets of molds and blades are installed in the machine:

1. 5 sets of round hole punching molds

2. A set of angle steel cutting blade

3. A set of square and round bar cutting blade

4. A set of flat-bar shearing blade

5. A set of notching blade.

Other moulds and blades should be ordered and paid additionally.

Main Technical parameters,

Model		Q35Y -16	Q35Y -20	Q35Y -25	Q35Y -30	Q35Y -40	Q35Y -50
Processing Capacity (KN)		600	900	1200	1600	2000	2500
Material Tensile Strength (Mpa)		≤450	≤450	≤450	≤450	≤450	≤450
Ram Stroke (mm)		80	80	80	80	100	100
Number of Stroke (times/min)(mm)		11-20	12-20	8-18	6-16	6-16	6-12
Throat Depth (mm)		300	355	400	600	530	600
Shear Angle		7°	8°	8°	8°	8°	8°
Flat She aring	Max Shearing Capacity (thickness* width)(mm)	16×250	20×330	25×330	30×335	40×335	50×300
Flat She aring	Max Shearing Capacity (thickness* width)(mm)	8×400	10×480	16×600	20×600	30×600	30×750
Bar She aring	Square Bar (mm)	40×40	50x50	50×50	55×55	60×60	65×65
	Round Bar (mm)	45	50	60	65	70	80
	H-beam (mm)		100×100	120×120	175×175	200×200	250×250
	C-channel (mm)	120× 53×5.5	160× 63×6.5	200× 75×9	280× 86×11.5	300x 89x11.5	320x 92x12
	I-beam (mm)	120× 74×5	160× 88×6	200× 75×9	280× 124×10.5	300x 130x13	320x 130x13

Angle Shearing	90°shearing (mm)	120× 120× 12	140× 140× 12	160× 160× 14	180× 180× 16	200× 200× 16	200× 200× 18
Angle Shearing	45°shearing (mm)	60× 60×8	70× 70×10	60× 60×7	80× 80×8	80× 80×10	100× 100×12
Hole Punching	max diameter of punching (mm)	ф25	ф30	ф35	ф38	ф40	ф45
Hole Punching	Punching thickness (mm)	16	20	25	28	35	40
Motor(KW)		5.5	7.5	11	15	18.5	18.5