PSL (WUHAN) SMART EQUIPMENT CO.LTD.
PSL (WUHAN) SMART EQUIPMENT CO.LTD.
Add to Cart
Sheet metal Slotting Gantry table CNC V-cut grooving machine
Introduction of the Gantry type V-cut,
The performance characteristics,
Forward and backward the plates holder (Y1 axis) movement, up and down (Z axis) movement and front and rear (Y2 axis) movement of the end press material are controlled by CNC system, AC servo motor drive, ball screw drive, high control precision, accurate positioning Features.
The left and right (X-axis) movement of the beam is driven by an Servo unit speed adjustable and the helical gear and the rack-and-pinion drive have the characteristics of high speed and strong load capacity.
The hydraulic clampinging system can adaptively press the side of the workpiece and the feeding side according to different thicknesses, which is one of the effective measures to ensure the processing precision and repeatability.
The compressed air/water blowing and cooling system not only prevents the cutting waste from scratching the surface of the workpiece, but also improves the life of the knifes.
The V-cut machine uses 3 knives to process "V" slot, so the cutting amount is evenly distributed and the deformation of the workpiece is reduced.
Main Technical parameters,
| Thickness range for plate to be processed | 0.6mm-4mm(stainless steel) |
| Thickness range for plate to be processed | 0.6mm-4mm(carbon steel) |
| Max. processed depth each time | 0.6mm |
| Max. processed depth | 2.5mm |
| Length for plate to be processed | 3200mm |
| Width velocity | 1250mm/1500mm |
| V type trough margin minimum distance | 6mm |
| Forward Cutting speed | 0-70m/min |
| X axis returning speed | 0-70m/min |
| Y axis minimum unit set | 0.01 mm |
| Y axis minimum positioning accuracy | ±0.05mm |
| Z axis minimum unit set | 0.01 mm |
| Positioning accuracy | ±0.05mm |
| Z axis stroke | 50mm |
| X-axis inverter/servo motor | 5.5KW EASYCAT |
| Z axis servo motor | 1KW EASYCAT |
| Y1,Y2 axis servo motor | 1KW EASYCAT |
| Hydraulic system | 1.5KW/8L/10MPa |
| 1500*3000 | 5300mm*2550mm*1560mm |
| Knife | 3sets |
| Pneumatic pressure | 6Map-8Map |
| Weight | 8.0T/8.5T |
| Main power | 380V/50HZ/3Phase |
Main parts instruction,
| CNC system | Taiwan ESAYCAT 19” HD LCD Touch screen |
| Servo units(X,Y,Z) | EASYCAT Taiwan |
| Cooling system | Water mist cooling pump |
| Knife | China (South Korea alloy knife head) |
| Ball screw | TBI Taiwan |
| Linear guiding | HIWIN Taiwan |
| Gear & rack | YYC Taiwan |
| Hydraulic system | Brand of Taiwan |
| Wire cables | Germany IGUS |
| Low voltage electrical appliances | Schneider |
| Limited switch | Brand of Japan or Germany |
